Status message

There is no scheduled class for this course. If you are interested in purchasing this course please click on the "Express Interest" button, fill in your contact information and submit a request for the course.
  • Course Length:
  • 2 Days Instructor Led

The cellular industry is gearing up for 5G. The industry is planning to support a variety of new and exciting services such as Augmented Reality (AR)/Virtual Reality (VR), hologram videos, and self-driving cars. Such services require a wide range of network capabilities to support a variety of consumer devices and Internet-of-Things (IoT) devices. This 5G course takes an in-depth look at the 5G Next-Generation Radio Access Network (NG-RAN) architecture and major operations that enable a 5G network to support the target 5G services. The 5G course first introduces new services and associated network performance requirements. Various aspects of the NG-RAN such as new protocols, Dual Connectivity, gNB-Central Unit, and gNB-Distributed Unit, and cloud-RAN or virtualized RAN. Key New Radio (NR) air interface specifics such as massive MIMO, numerology, and flexible frame structure are illustrated. Network acquisition, random access, and connection setup are described. Registration and session setup are discussed along with a close look at network slicing. The data transfer in both downlink and uplink is described. Mobility in connected, inactive, and idle modes is discussed. Finally, the status of 5G in in the industry is summarized.

Tags: 5G Course, 5G Training, 5G Technology Training

This detailed technical course is intended for engineering and related job functions who need to get an in-depth understanding of 5G NG-RAN architecture and operations.

After completing this course, the student will be able to:
• Illustrate the architecture of the NG-RAN
• Describe the frame structure with numerology of the air interface
• Summarize architecture enhancements such as Cloud-RAN and Dual Connectivity
• Identify key steps of network acquisition, random access, and connection setup
• List main steps of registration, network slice selection, and session setup
• Give examples of QoS parameters in 5G
• Explain how data is transferred in the downlink and the uplink
• Differentiate between the connected mode mobility and the idle/inactive mode mobility

1. 5G in a Nutshell
1.1. Evolution to 5G
1.2. Services and performance goals
1.3. Key 5G components
1.4. SA and NSA deployments
2. NG-RAN Architecture
2.1. 5G network architecture
2.2. Multi-RAT dual Connectivity (e.g., EN-DC)
2.3. gNB-CU and gNB-DU
2.4. Protocols for NG-RAN interfaces
2.5. Cloud RAN
2.6. NG-RAN and UE identifiers
3. New Radio (NR) Air Interface
3.1. mmW and sub-6 GHz spectrum
3.2. Massive MIMO
3.3. Multiplexing and multiple access
3.4. Numerology and frame structure
3.5. Physical signals and channels
3.6. Dual RRC, RRC states, and state transitions
3.7. Air interface protocol stack
4. Network Acquisition, Random Access, and Connection Setup
4.1. DL synchronization
4.2. Minimum SI and Other SI
4.3. Random access procedure
4.4. Connection establishment with gNB-CU and gNB-DU
5. Registration and Session Setup
5.1. Overview of registration
5.2. Network slicing
5.3. PDU session establishment
5.4. QoS in 5G
6. DL and UL Data Transfer
6.1. Overview of data transfer
6.2. Measurements
6.3. Scheduling
6.4. Data transmission
6.5. H-ARQ
6.6. RLF: detection and resolution
7. Operations in Connected, Inactive, and Idle Modes
7.1. Cell- and Beam-level mobility
7.2. Handover stages
7.3. Inter-DU/Intra-CU mobility
7.4. LTE mobility with dual connectivity
7.5. Cell reselection
7.6. Paging and RNA

Suggested Prerequisites

• Introduction to 5G: (Blended Learning)
• Technology Primer: 5G Services and Network Architecture (Instructor-led) and
• Technology Primer: 5G Radio Technologies and Deployments (Instructor-led)